-
DC-6GHz 20W NEX10 RF Load – MNDL-20-6-Nex10M for DAS Termination
Sep , 08 2026
Anyone working on in‑building DAS probably has a handful of N‑type loads in their toolkit. Screw them on for field testing, port termination, or troubleshooting. But things have changed over the last few years – antenna panels are getting denser, and N‑type connectors are simply too bulky. NEX10 is showing up on more and more equipment. Maniron's MNDL‑20‑6‑Nex10M – DC‑6GHz, 20W, NEX10 male, VSWR ≤...
View more
-
Feeder, Cable, Jumper: Three Commonly Confused Concepts in RF Engineering
Sep , 22 2026
These three concepts do not sit on the same logical plane. Cable is a material‑level generic term — any coaxial cable that carries RF signals, whether semi‑rigid, semi‑flexible, or braided, is called a cable. Feeder and jumper are functional‑level classifications — both are specific application forms of cable, distinguished by the role they play in the system. In one sentence: a feeder is the high...
View more
-
Three 10dB Couplers Compared: Insertion Loss and PIM Test Results – Cavity vs Microstrip vs Stripline
Sep , 29 2026
In DAS indoor distribution systems and RF link designs, the 10dB directional coupler is one of the most frequently used passive components. The two specifications engineers care about most are insertion loss and passive intermodulation (PIM) — the former directly eats into the link budget, the latter determines whether the uplink noise floor can be kept down. There are three main manufacturing tec...
View more
-
DAS Link Budget Calculation: A Step-by-Step Guide from RRU to Antenna Port
Oct , 13 2026
Why Is the Link Budget Always Off? The most frustrating part of DAS design isn't drawing the system diagram. It's calculating the antenna port power, thinking it's sufficient, and then measuring it on site to find it's off by 5 or 6 dB. Coverage shrinks, users complain, and when you trace it back you find — component insertion loss was undercalculated, feeder loss was estimated wrong, connector lo...
View more
-
Underground Garage vs Tunnel vs High-Rise: Engineering Differences in Blind Spot Coverage
Oct , 20 2026
A garage is a "surface" problem, a tunnel is a "line" problem, and a high-rise is a "height" problem. The root causes of blind spots differ, so the signal distribution method, antenna selection, and component requirements are completely different. Applying the same solution to all three scenarios will almost certainly fail in one of them. This isn't theoretical. In an underground garage, signal at...
View more
-
Multi-Operator DAS: Band Combination Traps That Create Fatal Intermodulation
Oct , 27 2026
The most dangerous scenario in a multi-operator DAS is rarely caused by choosing a component with a poor PIM specification. The real problem often lies in the band plan itself — the frequency relationship between two downlink bands mathematically places intermodulation products inside another operator's uplink receive band. No matter how good the components are, the products land where they land. ...
View more
