-
Multi-Operator DAS: Band Combination Traps That Create Fatal Intermodulation
Oct , 27 2026
The most dangerous scenario in a multi-operator DAS is rarely caused by choosing a component with a poor PIM specification. The real problem often lies in the band plan itself — the frequency relationship between two downlink bands mathematically places intermodulation products inside another operator's uplink receive band. No matter how good the components are, the products land where they land. ...
View more
-
VSWR vs Return Loss vs Isolation vs Directivity: How These Four RF Parameters Connect
Nov , 03 2026
A conversation that happens on site more often than it should "What's the isolation on this coupler?" "22dB." "And directivity?" "Not listed. It only says isolation." "So can we use this part or not?" The conversation stalls here. 22dB isolation doesn't sound bad. But without directivity, you don't know whether that 22dB comes from "the forward coupled port and the reverse isolation port are well ...
View more
-
Cavity vs Dielectric vs SAW vs Microstrip Filter: DAS Selection Guide
Nov , 11 2026
A filter selection mistake costs far more than a coupler mistake. Get a coupler wrong and you lose a fraction of a dB in insertion loss. Get a filter wrong and you can burn out a power amplifier, eat the entire link budget with in-band insertion loss, or watch the center frequency drift out of band at high temperature. The most common mistake in selection guides is asking "which filter is best." N...
View more
-
Resistive vs Wilkinson vs Cavity vs Microstrip Power Splitter: DAS Selection Guide
Nov , 17 2026
The most common mistake in power splitter selection is treating "2-way splitter" as a single product category and comparing on price. In reality, a 2-way splitter has at least four completely different technology routes, with insertion loss ranging from 0.1dB to 6dB, isolation from 6dB to over 20dB, and power handling from watt-level to 500W-class. Demanding cavity-level performance at microstrip ...
View more