-
Why Is My RF Signal Weak After Adding a Filter?
May , 16 2026
At first glance, adding an RF filter sounds like a simple upgrade. The goal is usually clear: Reduce interference Clean up the signal Improve network stability Protect sensitive RF equipment But in real projects, many engineers and installers run into the same frustrating problem: “The interference is gone, but now the signal is much weaker.” This happens more often than people expect, especially ...
View more
-
Passive DAS vs. Active DAS Pros, Cons & Best Use Cases — A Technical Deep Dive
Jun , 06 2026
1. Why compare these two architectures? Over 80% of mobile communications happen indoors. Office concrete, shopping mall metal structures, hospital shielding — all block signals. You need a way to bring the signal from outside to the inside. A Distributed Antenna System does exactly that. It takes one signal source and distributes RF via coaxial cable or fiber to every antenna inside a building. B...
View more
-
DAS vs IBS: What's the Difference? | In-Building Coverage Explained
Jun , 09 2026
1. The real problem: indoor signal is broken Over 80% of mobile traffic happens indoors — yet most buildings kill signal in seconds. Concrete walls, steel frames, low-E glass, underground parking: all block RF. From 2G to 4G, outdoor macro towers could still punch through building walls. That changed with 5G. Higher spectrum (3.5GHz to mmWave) barely penetrates. Even with boosted power, 5G signals...
View more
