-
Three 10dB Couplers Compared: Insertion Loss and PIM Test Results – Cavity vs Microstrip vs Stripline
Sep , 29 2026
In DAS indoor distribution systems and RF link designs, the 10dB directional coupler is one of the most frequently used passive components. The two specifications engineers care about most are insertion loss and passive intermodulation (PIM) — the former directly eats into the link budget, the latter determines whether the uplink noise floor can be kept down. There are three main manufacturing tec...
View more
-
DAS Link Budget Calculation: A Step-by-Step Guide from RRU to Antenna Port
Oct , 13 2026
Why Is the Link Budget Always Off? The most frustrating part of DAS design isn't drawing the system diagram. It's calculating the antenna port power, thinking it's sufficient, and then measuring it on site to find it's off by 5 or 6 dB. Coverage shrinks, users complain, and when you trace it back you find — component insertion loss was undercalculated, feeder loss was estimated wrong, connector lo...
View more
-
Underground Garage vs Tunnel vs High-Rise: Engineering Differences in Blind Spot Coverage
Oct , 20 2026
A garage is a "surface" problem, a tunnel is a "line" problem, and a high-rise is a "height" problem. The root causes of blind spots differ, so the signal distribution method, antenna selection, and component requirements are completely different. Applying the same solution to all three scenarios will almost certainly fail in one of them. This isn't theoretical. In an underground garage, signal at...
View more
-
Multi-Operator DAS: Band Combination Traps That Create Fatal Intermodulation
Oct , 27 2026
The most dangerous scenario in a multi-operator DAS is rarely caused by choosing a component with a poor PIM specification. The real problem often lies in the band plan itself — the frequency relationship between two downlink bands mathematically places intermodulation products inside another operator's uplink receive band. No matter how good the components are, the products land where they land. ...
View more
-
Resistive vs Wilkinson vs Cavity vs Microstrip Power Splitter: DAS Selection Guide
Nov , 17 2026
The most common mistake in power splitter selection is treating "2-way splitter" as a single product category and comparing on price. In reality, a 2-way splitter has at least four completely different technology routes, with insertion loss ranging from 0.1dB to 6dB, isolation from 6dB to over 20dB, and power handling from watt-level to 500W-class. Demanding cavity-level performance at microstrip ...
View more