-
Why Is My RF Signal Weak After Adding a Filter?
May , 16 2026
At first glance, adding an RF filter sounds like a simple upgrade. The goal is usually clear: Reduce interference Clean up the signal Improve network stability Protect sensitive RF equipment But in real projects, many engineers and installers run into the same frustrating problem: “The interference is gone, but now the signal is much weaker.” This happens more often than people expect, especially ...
View more
-
How to Customize Frequency Bands for Multi-Operator POI Combiners?
May , 30 2026
In modern Indoor Building Solutions (IBS) and Distributed Antenna System (DAS) projects, multi-operator co-construction and infrastructure sharing have become the definitive global model. Whether navigating international airports, expansive subway networks, high-density commercial complexes, mega-stadiums, or premier corporate high-rises, mobile operators increasingly prefer to deliver seamless wi...
View more
-
Combiner vs Duplexer: Not the Same Thing — A Complete Engineering Guide
Jul , 28 2026
Combiner and duplexer are not the same thing. A combiner is a device that merges two or more RF signals into a single output path, with all signals flowing in the same direction — primarily used for power combining on the transmit side. A duplexer is a three‑port device that isolates transmit and receive signals, allowing them to share a single antenna, with the two signal paths flowing in opposit...
View more
-
4x4 Hybrid Combiner 698-2700MHz: The Engineering Guide
Sep , 01 2026
What Is a 4x4 Hybrid Combiner and Why Does It Matter? A 4x4 hybrid combiner is a passive RF device that evenly distributes a signal from any of its four input ports to all four output ports, while maintaining high isolation between ports. Think of it as a signal router that takes whatever goes into one port and splits it equally (with a 6dB theoretical loss) to all four outputs, but prevents signa...
View more
-
Underground Garage vs Tunnel vs High-Rise: Engineering Differences in Blind Spot Coverage
Oct , 20 2026
A garage is a "surface" problem, a tunnel is a "line" problem, and a high-rise is a "height" problem. The root causes of blind spots differ, so the signal distribution method, antenna selection, and component requirements are completely different. Applying the same solution to all three scenarios will almost certainly fail in one of them. This isn't theoretical. In an underground garage, signal at...
View more
-
Cavity vs Dielectric vs SAW vs Microstrip Filter: DAS Selection Guide
Nov , 11 2026
A filter selection mistake costs far more than a coupler mistake. Get a coupler wrong and you lose a fraction of a dB in insertion loss. Get a filter wrong and you can burn out a power amplifier, eat the entire link budget with in-band insertion loss, or watch the center frequency drift out of band at high temperature. The most common mistake in selection guides is asking "which filter is best." N...
View more