-
5 Ways a Bad Passive Component Can Ruin Your DAS Link Budget
Jul , 14 2026
Designing a DAS link budget is an exercise in controlled optimism. You calculate cable loss per 100 meters, add up splitter and coupler insertion loss, account for connector transitions, and leave a few dB of margin for things you can't control. Then you order the components, install the system, and turn it on. And the numbers don't match. Not by a little. By 6, 8, sometimes 10 dB. Coverage holes ...
View more
-
4G Internal Antenna vs External Antenna: How to Choose the Right LTE Antenna
Jul , 21 2026
During the design of 4G LTE communication equipment, antenna selection is often one of the most critical decisions affecting wireless performance. For equipment manufacturers, system integrators, and wireless solution providers, a common question keeps coming up: Should I choose a 4G internal antenna or a 4G external antenna? Many engineers fall into a simple trap early in a project: “External ant...
View more
-
Combiner vs Duplexer: Not the Same Thing — A Complete Engineering Guide
Jul , 28 2026
Combiner and duplexer are not the same thing. A combiner is a device that merges two or more RF signals into a single output path, with all signals flowing in the same direction — primarily used for power combining on the transmit side. A duplexer is a three‑port device that isolates transmit and receive signals, allowing them to share a single antenna, with the two signal paths flowing in opposit...
View more
-
Future Trends of Low PIM Technology – 2026 and Beyond
Aug , 18 2026
Why Low PIM Matters More Than Ever If you've ever designed or maintained an RF system, you've likely run into this problem: downlink signal is strong — users see full bars — but uplink is dead. Calls drop. Throughput tanks. The base station keeps adjusting parameters to no effect. That's Passive Intermodulation (PIM) at work. In the past, PIM was treated as a "nice‑to‑fix" optimization item. By 20...
View more
-
4x4 Hybrid Combiner 698-2700MHz: The Engineering Guide
Sep , 01 2026
What Is a 4x4 Hybrid Combiner and Why Does It Matter? A 4x4 hybrid combiner is a passive RF device that evenly distributes a signal from any of its four input ports to all four output ports, while maintaining high isolation between ports. Think of it as a signal router that takes whatever goes into one port and splits it equally (with a 6dB theoretical loss) to all four outputs, but prevents signa...
View more
