-
Combiner vs Duplexer: Not the Same Thing — A Complete Engineering Guide
Jul , 28 2026
Combiner and duplexer are not the same thing. A combiner is a device that merges two or more RF signals into a single output path, with all signals flowing in the same direction — primarily used for power combining on the transmit side. A duplexer is a three‑port device that isolates transmit and receive signals, allowing them to share a single antenna, with the two signal paths flowing in opposit...
View more
-
RF Isolator vs Circulator – What's the Real Difference?
Aug , 04 2026
Engineering deep dive · Ports, functions, specs, and selection traps RF Isolator and Circulator are two of the most misunderstood passive components in microwave engineering. The core difference comes down to ports and function. An Isolator is essentially a three‑port Circulator with its third port terminated into a matched load. A Circulator is a non‑reciprocal signal router — it directs signals ...
View more
-
4x4 Hybrid Combiner 698-2700MHz: The Engineering Guide
Sep , 01 2026
What Is a 4x4 Hybrid Combiner and Why Does It Matter? A 4x4 hybrid combiner is a passive RF device that evenly distributes a signal from any of its four input ports to all four output ports, while maintaining high isolation between ports. Think of it as a signal router that takes whatever goes into one port and splits it equally (with a 6dB theoretical loss) to all four outputs, but prevents signa...
View more
-
Underground Garage vs Tunnel vs High-Rise: Engineering Differences in Blind Spot Coverage
Oct , 20 2026
A garage is a "surface" problem, a tunnel is a "line" problem, and a high-rise is a "height" problem. The root causes of blind spots differ, so the signal distribution method, antenna selection, and component requirements are completely different. Applying the same solution to all three scenarios will almost certainly fail in one of them. This isn't theoretical. In an underground garage, signal at...
View more
-
Resistive vs Wilkinson vs Cavity vs Microstrip Power Splitter: DAS Selection Guide
Nov , 17 2026
The most common mistake in power splitter selection is treating "2-way splitter" as a single product category and comparing on price. In reality, a 2-way splitter has at least four completely different technology routes, with insertion loss ranging from 0.1dB to 6dB, isolation from 6dB to over 20dB, and power handling from watt-level to 500W-class. Demanding cavity-level performance at microstrip ...
View more